May 30, 2010 Play 6.20 PSP Games on 5.50 Gen D3 or 5.00 m33-6 Custom Firmware [m33_620 Beta 2]: PSP Plugins & Patcher

But! There is a catch. A couple days back Torky, the coder has released a cool plugin: m33_620… m33_620 lets you to play new PSP games that released only for 6.20 firmware on your 5.50 Gen D3 or 5.00 m33-6 Custom Firmware.However, the plugin still in Beta and needs a lot of improvement.

Although we no yet confirm on it's abilities, but some sources have proved that the plugin works well and enable 5.50 Gen D3 or 5.00 m33-6 Custom Firmware to play new games. I have prepared a few of steps on how to install and run this plugin on your PSP. So, go dig those up.

[Click HERE to Get the new m33_620 plug-in ]

Requirement:

• Only for PSP 5.50 Gen D3 or 5.00 m33-6 Custom Firmware.
• m33_620 plugin (Click Here for Source and Download location)
• PSP Games ( UMD or Untouched ISO)

Notes: I have tried this plugin on Touched ISO (Patched ISO), and it works too*( Some games).

Warning:

Please, avoid to try m33_620 plugin on PSP 3000 and 2000(TA-088V3)

because the toturial needs you to enter your PSP flash 0.

Statement from Torkey (Translate):

A release of this plugin on other sites as pspking.de and is pspsource.de. PROHIBITED. If a copy of this plugin will appear on other sites, update is no longer follow and it is still a lot of planned features for future versions.

Tutorial: Super thanks to InfinitiProject


Step 1: Install the plugin

1) Extract m33_620.prx Beta 2.


















2) Copy m33_620.prx file and paste it into root of memory stick>> seplugins>>...

3) Inside your seplugins folder, open game text file. Copy this (blue) command 'ms0:/seplugins/m33_620.prx 1' and paste it on game text as shown in red circle.


Close the text and save it.






Step 2: Configure Recovery Menu

The next step, you need to enable the plugin in recovery menu. If you have problems to enable the plugin, please refer the guide provided ( Guide enable PSP plugins).


After you are successfully enable the plugin, please stay tune on your Recovery Menu.

1) On your Recovery Menu, select Configuration and press enter.










2) Select 'Use version.txt' and press enter to enable it. After you're done, exit the recovery menu.




Step 3: Enter Flash 0

Warning:

Just follow the instructions given. Never touch or change or replace on other flash 0 files.

 If you failed to follow this warning, you may brick your PSP.

1) On your PSP XMB, press [SELECT] button to activate your PSP VSH MENU.


Select 'USB DEVICE', then toggle control buttons to change it into 'Flash 0'. Exit the VSH MENU. 


Connect the PSP to your computer.



2)Select 'vsh' folder.






3) Open 'etc' folder.





4) Double clicks on version to open the text file.










5) You will find, 'release' labeled with '5.50' or '5.00' ( Based on your current Custom Firmware). Replace the label with '6.20' as shown on the picture.

After you have finished, save the text file and exit your Flash 0.

Now, you should be able to test your PSP Games. Let's rock. If you find any information or questions about this plugin, please state your comments. I'm glad if you could share your opinion.


This is a test: Done by maxconsole's user: [InfinitiProject]

My US PSN purchased games confirmed working on 5.00 M33-6 & 5.50 GEN-D3
Rock Band Unplugged - 5.51 (Works)
LittleBIGPlanet - 6.20 (Works)
Gran Turismo - 6.00 (Works)
SOCOM Fireteam Bravo 3 - 5.51 (Works)
Patchwork Heroes - 6.20 (Works)
Echoshift - 6.20 (Works)
Uno - 6.00 (Works)
Pixeljunk Monsters Deluxe - 5.51 (Works)
Motorstorm Arctic Edge - 5.55 (Works)
Patapon 2 - 5.03 (Works)
Def Jam Fight For NY - 5.51 (Works)
Obscure: The Aftermath - 5.51 (Works)
Undead Knights - 6.00 (Works)
Sega Genesis Collection - 5.51 (Works)
LocoRoco Midnight Carnival - 5.03 (Works)
Kurulin Fusion - 5.51 (Works)
Ridge Racer - 6.10 (Works)
Beats - 5.03 (Works)
Ape Quest - 3.71 (Works)
Armored Core 3 - 6.00 (Works)
Mercury - 6.20 (Works)
Mercury Meltdown - 6.20 (Works)
Creature Defense - 5.51 (Works)
Crimson Room Reverse - 6.00 (Works)
Everyday Shooter - 3.95 (Works)
Pinball Heroes - 5.51 (Works)
Prince of Persia Revelations - 5.51 (Works)

Brainpipe (Minis) 6.00 (Works)
Homerun Hitters (Minis) 6.00 (Works)
Hysteria Project (Minis) 6.00 (Works)
Monopoly (Minis) 6.00 (Works)

Modnation Racers DEMO - 6.20 (Doesn't work)
Metal Gear Solid Peace Walker DEMO - 6.20 (Works)
Naruto Shippuden: UNH3 - 6.20 (Doesn't work)
The Eye of Judgement DEMO - 6.20 (Works)

Running PSN PSX/Custom PSX Games with this plugin enabled causes the PSP to freeze and shut down.
Disable the plugin before running those games.

Credits:

Torkey

PSPKing

InfinitiProject

Maxconsole

PSP-Hack

Read more >>

May 29, 2010 [Link fixed] Naruto Shippuden Ultimate Ninja Heroes 3 USA + [Cheat.db file]: PSP Games & Cheats Free Download

Naruto Shippuden Ultimate Ninja Heroes 3 USA + [Cheat.db file]

Requirement:

• PSP Custom Firmware enable (Tested on 5.00 m33)
• Naruto Shippuden Ultimate Ninja Heroes 3 USA (Hako version)
• Data-v5 patcher

iFile:

Download Part 1 (200mb)

Download Part 2 (200mb)

Download Part 3 (200mb)

Download Part 4 (200mb)

Download Part 5 (200mb)

Download Part 6 (131mb)

Password: hako

Megaupload:

Download Part 1
Download Part 2
Download Part 3
Download Part 4

Download Part 5
Download Part 6

Data-v5 patcher Download (12.4mb)
Link 1 Download	Link 2 Download	Link 3 Download
Password: hako

Click Here for the guide on how to install Data-v5 patcher

Cheat.db:
Click Here to Download Naruto Shippuden Ultimate Ninja Heroes 3 USA Cheat.db



Naruto Shippuden Ultimate Ninja Heroes 3 USA: Trailer Preview



Credits:
Hako
PSPGameStation

Read more >>

Guide on how to take Screenshots while playing PSP Games/XMB through PSP [CWCheat & FreeCheat]: PSP Tip & Guide

Introducing a new tip  to share on how to take game screenshots through your PSP with two different plugins: CWCheat and FreeCheat —both are multi-function homebrew plugins — enable game cheat code (main function).

From what I gather, after some trial and experiences, both plugins are the best tools to take screenshots rather than other plugins that released since the screenshot plugin introduced. CWCheat and FreeCheat can give you quality performance and less problems while snapping photos. To use the plugins, you need to follow a few guide that I already provided.

Guide on how to take screenshots through your PSP [CWCheat and FreeCheat]


Tutorial 1

Requirement:

• PSP Custom Firmware enable
• CWCheat plugin (Download Here)

If you have problems to install CWCheat plugin, 

please refer the guide provided. (Guide on how to install/run CWCheat)

Step 1

1) To activate CWCheat main menu, you need to press [SELECT] button for several seconds (over than 4 seconds) on your XMB.

1) This is the main menu of CWCheat plugin. Normally, when you enable the plugin (on Recovery Menu) all CWCheat functions will automatically activate. But sometimes, problems may occur. What I mean is, although your CWCheat screenshots mode is active but you can not run it. To solve the problem, you need to do a small 'check-up' on the plugin preference.

2) Press [SELECT] button to enter the main menu. Choose 'Settings' and press enter.

3) You will see some option there. What you need to do is, make sure 'Screenshoot compatibility mode' is labeled by [Y]

After that, select 'Change buttons' to proceed to next step

4) On the 'Change Button' a few of button configuration. You will see 'Screenshoot' was labeled with [L trigger]. It means, [L Trigger] is a hotkey to catch screenshots while you are playing games or in XMB. You change the hotkey by pressing any buttons that suit you. After you finished, exit the menu and test it by pressing the hotkey that you choose.

Note:

While taking a screenshot, your PSP screen will freeze and your Memory Stick LED will flashing for a few seconds (the process is running). Wait until the process done. If the process took much time, it means you failed to snap the picture. Your PSP will hang too. So, if you face this problem, you need to restart your PSP. (No good for ChickHEN newbies).

Check your new screenshots on PSP XMB>> Picture>> Memory Stick>>....They should be there or you can check them direct inside root of memory stick>> Picture/ root of memory stick>> Game>> photo


Tutorial 2

Requirement:

• PSP Custom Firmware enable
• FreeCheat ( Download Here)

If you have problems to install FreeCheat plugin, 

please refer the guide provided. (Guide on how to install/run FreeCheat)

Step 1

To activate FreeCheat main menu, you need to press [NOTE] button for several seconds (over than 4 seconds) on your XMB/Game.

1) This is the main menu of FreeCheat plugin. The plugin will let you to take screenshot in two methods. The first method is : you can take a screenshot through the main menu of FreeCheat and the second is: you can take a screenshot by pressing any hotkeys that you set (Without enter the main menu).

For the 1st method: When you find any screenshots that you want to take, quickly press [NOTE] button to enter the main menu and at the same time to pause the scene. Next, choose SCREENSHOT on the main menu and press enter. You will see your PSP screen wiping down while the process is running. You will get the picture after the process was finished.

The 2nd method: First, you need to set up a hotkey before you can take any screenshots. To set it, you need to enter FreeCheat Setup. Select 'Option' on the menu and press enter.

2) This is FreeCheat SETUP. You will see 2 options that relate with our tutorial. They are 'Setup Hotkeys' and 'SCREENSHOT Setup'. 

To set up the hotkey, select 'Select Hotkeys' and press enter. Please refer 3A figure.

To modify quality of pictures that you will take, save format pictures and save picture location, select 'SCREENSHOT Setup' and press enter. Please refer 3B figure.

3A) You will see various of FreeCheat hotkeys. Select 'Screenshot hotkey' and press enter.

After you enter 'Screenshot hotkey', you need to configure your own hotkey to take screenshot (Press Hotkey). When you are finished, exit the menu.

*Sorry-I failed to provide 'Press Hotkey' figure.

3B) This is SCREENSHOT Setup. You can configure them by press enter button on any option or toggle button on any option.

4) Finally, test your work by pressing the hotkey that you choose.

Note:

While taking a screenshot, your PSP screen will wipe down and your Memory Stick LED will flashing for a few seconds (the process is running). Wait until the process done. If the process took much time, it means you failed to snap the picture. Your PSP will hang too. So, if you face this problem, you need to restart your PSP. (No good for ChickHEN newbies).

Check your new screenshots on PSP XMB>> Picture>> Memory Stick>>....They should be there or you can check them direct inside root of memory stick>> Picture/ root of memory stick>> Game>> photo

Read more >>

May 28, 2010 Play DS games on your PSP (DS emulator: ): PSP Homebrew Emulator

Jonlime, DSonPSP project… It gets your PSP back on DS emulator — Nintendo DS touchscreen console… Don’t get it twisted though. As noted below, this emulator is still Beta/Unofficial and needs a lot of fixs. So, for now, do not expect much that you can play all DS games on this emulator. But, you can try it on your PSP to see how much DSonPSP project has develop since Yoshihiro is having a break from the PSP scene.

Jonlime note

Original port by YoshiHiro based on DeSmUmE core 9
This is a continuation of the old DSonPSP project. I have included one homebrew game… Also in the package is a file called “samples.zip” it contains all of the DS samples that i have tested and that work, if you want to test them uncompress it and put the .nds files in the same folder as the eboot
Place all of your other DS homebrew/backups in the same folder as the EBOOT

Requirement:

• PSP Custom Firmware enable
• DSonPSP (Download Here)
• DS roms ( Sample rom already include in DSonPSP) or you can use your own ds roms. (I'm quite sure it cannot works well)

Tutorial

Step 1

1) Extract DSONPSP zip file.

2) Copy DSONPSP folder and paste it right into the root of memory stick>> PSP>> GAME>> ....

If you still do not know on where to paste this folder, please refer to the Guide on how to install application provided.(Installing Guide)

*If you want to use your own DS roms, just place them inside this folder (DSONPSP folder)

Step 2

On your PSP XMB>> Games>> Memory Stick>>  DSONPSP

Screenshots:

Credit:

Jonlime

PSP-Hack

QJ.net

PspSlimHack

Read more >>

Hexyz Force Full USA ISO: PSP Games Free Download

Hexyz Force Full USA ISO with cheat.db:

Full patched( No need plugins)

iFile:

Download Part 1 (200mb)

Download Part 2 (200mb)

Download Part 3 (121mb)

Password: hako

MediaFire:

Download Part 1 

Download Part 2 

Download Part 3 

Password: Zman

Megaupload:

Full Download (533.79mb)

Password: Zman

Cheat:
Click Here to Download Hexyz Force Cheat.db

Hexyz Force: Video Preview

Credits:
Zman
Hako
pspgamestation

Read more >>

May 27, 2010 Nintendo 64 emulator for the PSP: PSP Homebrew Emulator

This PSP Homebrew emulator is a must-have for any hacked PSP: DaedalusX64 team Nintendo 64. Now at revision 502, packing mostly fixes and whatnot, DaedalusX64 is a Nintendo 64 emulator for Windows and PSP. Daedalus will let your PSP supports most Nintendo 64 rom formats (.v64, .z64, .rom etc). The emulator also provided screenshots capture while you were playing the games. All new update — just for you.


Requirement: 

• PSP Custom Firmware enable ( CFW 4.00 or higher)
• DaedalusX64 revision 502 ( Download Here)
• Nintendo 64 rom (.v64, .z64, .rom etc)

Sample rom: Zelda - Ocarina of Time [Download Here] or Nintendo 64 roms free download (Website Here)

Tutorial:

Step 1

1) Extract 128069_d502 zip file.

2) Copy d502 folder and paste it right into the root of memory stick>> PSP>> GAME>> ....

If you still do not know on where to paste d502 folder, please refer to the Guide on how to install application provided.(Installing Guide)

3) Copy N64 folder and paste it right into the root of memory stick.

4) Copy your N64 roms and paste it into N64 folder

*Normally, the download roms are in zip file. So, please extract them first before you copy the exact roms ( file with.v64, .z64, .rom format etc) and paste it into N64 folder.












Step 2

On your PSP XMB>> Games>> Memory Stick>>  DaedalusX64


Extra:

1) This is the main menu of DaedalusX64


* To exit to XMB, please press [HOME] button while in the main menu

Game Screenshots

Credits:

DaedalusX64 team

QJ.net

PSP-Hack

Read more >>

May 26, 2010 Comprehensive ISO/CSO for your PSP [ISO Tool v1.43]: PSP Homebrew Application

A couple days back Japanese Homebrew Developer released ISO TOOL v1.43… ISO TOOL v1.43 is a comprehensive tool and the application lets you convert ISO to CSO or vise verse, decrypt EBOOT files, recovery EBOOT, rename ISO/CSO and import game prx files. It also works as PSP game patcher. ( I'm still working out on it). The most important, you can work all the functions trough your PSP.

Update: Translate

* 1.43
[UPDATE] GOD EATER prometheus when the patch was automatically apply patches to avoid freeze
UMD ID has been judged "ULJS-00237" applies only

[UPDATE] Add prometheus recovery mode 

* 1.42

[BUG] UMDGEN Fixed ISO, etc. could not rebuild

* 1.41

[UPDATE] prx to change the folder location, etc. The following DATA

[UPDATE] KHBBS prometheus.prx special case of the change to take advantage of

Requirement:

• PSP Custom Firmware enable
• ISO TOOL v1.43 (Download Here)

Tutorial

Step 1

1) Extract 128070_isotool143

3) Copy iso_tool folder and paste it right into the root of memory stick>> PSP>> GAME>> ....

If you still do not know on where to paste this folder, please refer to the Guide on how to install application provided.(Installing Guide)

Step 2

On your PSP XMB>> Games>> Memory Stick>> ISO Tool v1.43

Screenshots

Credits:

Takka

QJ.net

PSP Hack

Read more >>

May 24, 2010 Tweaks and Reassign your PSP button (MacroFire 3.2.4: New Update):PSP Plugins

MacroFire 3.2.4 has been released with few of improvements by Japanese Homebrew Developer, pen. This cool plugin works as a software that allow you to reassign PSP button, performed automatically function to certain actions, certain actions will be recorded, you can repeat it and much more. In this post, I have provided a guide on how to install MacroFire 3.2.4 on your PSP. Please enjoy yourself.

MacroFire 3.2.4 Change logs:

2010/05/21 - 3.2.4 : Adjustment sensitivity in the analog stick 100% to 1%  changed, but Up and Down to move from the center, had been  fix to go to the left and right.
2010/05/18 - 3.2.3 : Macro Buttons - the problem START / SELECT had been fix- ignored during playback
2010/05/05 - 3.2.2 : Macrofire.ini can read the values correctly: Fixed

Translate

Requirement:

• PSP Custom Firmware enable (except for 3.71 m33 and older CFW)
• MacroFire 3.2.4 ( Download Here)

Tutorial

Step 1

1) Extract 128060_macrofire 324 zip file.

2) Open seplugins folder

3) Copy all the files and paste them right into root of memory stick>> seplugins>>...

or.....

You can replace the old files inside your seplugins folder, but if you want to keep text command inside game, game150, pops and vsh, you can....

* Please follow this step if you already have game, vsh, game150 and pops file inside your seplugins folder:

• Open file game, vsh, and pops .
• Copy the text commands in the game, vsh, game150 and pops file and paste these commands in the root of memory stick>> seplugins>> game, the root of memory stick>> seplugins>> vsh, and the root of memory stick>> ; seplugins>> Pops. (Make sure that you have paste the command on the correct file)

If you're still confused, please refer to the manual Installing plugins that provided (Guide Installing Plugins)

Step 2

The next step, you need to enable the plugins in recovery menu. Please enable all the plugins named with MacroFire. If you have problems to enable the plugin, please refer the guide provided ( Guide enable PSP plugins).

Developer Users' Guide: or you can refer the User Guide that I have provided: [MacroFire User Guide]

The basic key operation in the menu is as follows.

• → ← ↓ ↑: move items
• (○ / ×) / button □: Change Option
• (○ / ×) button: to identify items
• (× / ○) button: Back
• START button: quickly exit the menu

MacroFire Engine

• Toggle this function to make plugin operate.
• Pound functions and macro functions, such as buttons will affect all of the features.
• The game starts just after it has been OFF, ○ / □ ON using the switch button.
• You can set the initial configuration file.

Buttons to launch the menu

• Set the menu button. MacroFire menu can be display by pressing a button combination in the game. 
• You can set it in the initial configuration file. 

Buttons to toggle the status of engine/Status notification

• Switch on this function to help you determine whether your MacroFire Engine is on or off. 

Analog stick sensitivity adjustment

• To adjust your PSP Analog stick sensitivity. 
• For more information, please refer manual_analogsens.txt. 

Remap settings

• Set the button reassignment. 

Rapidfire settings

• Sets the fire button. 

Macro settings

• Feature set and run the macro. 

Credits:

• pen 
• QJ.net 
• PSP-Hack

Read more >>

May 22, 2010 Guide on how to run Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack): PSP Guides

In the previous post, I have showed you a guide on how to install Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) on your PSP. As you knew, Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) is an application that flashes a fresh M33 CFW (from 3.71 and above) to recover semi-bricks or to up-/downgrade CFW without using Pandora. Besides that it also can backup the FW flash and restore selected parts such as XMB theme, settings, PSN activation, complete firmware and much more. Now, I want to share with you a guide on how to run Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) on your PSP.


Requirement:

Warning: Never try Hellcat's Recovery Flasher 1.60 

on PSP 2000 (TA-088V3) and PSP 3000

• PSP (except PSP 2000 (TA-088V3) and PSP 3000) Custom Firmware enable
• Hellcat's Recovery Flasher 1.60 (Download Here)
• 550.PBP file ( Download Here)
• Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) (Download Here)

or

• Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)+550.PBP file (Download Here)

...........................................

If you have any problems to install Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack), please refer the guide provided 

[Guide on how to install Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)]

................................................

Tutorial

After you have successfully installed Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)......


Step 1

On your PSP XMB>> Games>> Memory Stick>> Hellcat's Recovery Flasher and press enter.

1) Select 'I AGREE, now take me to the program' to enter the application main menu.

2) This is Hellcat's Recovery Flasher main menu. First, you need to choose which Target FW (based on PBP.file that placed in the root of PSP Memory Stick) that you want to flash on your PSP. In this situation, I want upgrade my PSP to 5.50 Gen-D3 CFW. I'm also already placed 550.PBP inside root of Memory Stick [As shown in guide on how to install Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)]. Select 'load from external FW pack'.

3) Next, select 'Install CFW (of version selected above)' to continue the process.

4) After that, you will see a message that ask you to choose a Firmware-Pack. You need to choose either PSP2000_550-GEN-D3.rfp or PSP1000_550-GEN-D3. If you used a slim please select PSP2000_550-GEN-D3 or for PHAT you need to select PSP1000_550-GEN-D3.

5) We almost done. You need to choose whether reset or do not reset your PSP previous settings.



Note: Reset settings is recommended



6) Finally, the application will flash your PSP. Please wait for a few minutes before the process is finished. You will ask to press any button at the final stage of the process before you need to make sure your PSP completely shutdown.

7) After successfully finishes all steps above, switch on your PSP.
...................................................................................
Additional guide:

You possibly have problem to activate your 5.50 Gen D3 vsh menu (Press [SELECT] Button). If yes, you need to follow a few instructions that I already provided.

Guide:


1)First step, you need to enter 5.50 Gen D3 recovery menu. To enter the recovery menu, please refer guide provided. ( Guide to enable plugins on recovery menu)

2) After successfully enter Recovery Menu, select Configuration and press enter.








3) Next, choose 'Use VshMenu' and press enter button to make 'currently' is labeled by VshMenu.


Finally, exit the Recovery Menu and enjoy....

....................................................................

Read more >>

Upgrade/Downgrade PSP Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) Now Support 5.50 GEN-D3: PSP Homebrew Application

Homebrew Developer, Hellcat is back with a new update of Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) … This version actually supported direct installation for a 5.50 GEN D3 Custom Firmware, without any extra steps. In other word, it is an alternative way to help you update your PSP to 5.50 Gen D3 besides using GEN installer .

Hellcat Note

Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) is fundamentally include two Packs (= .RFP files) , one to be used for installing on a PSP 2000 ("PSP Slim") and one for installing on a PSP 1000 ("Fat PSP").With that your Slim PSP is capable of being flashed to CFW!

Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)

• recover semi-bricks
• upgrade/downgrade your CFW (Now support 5.50 Gen D3)
• flash *ANY* CFW directely to almost any other 
• backup/restore firmware flash (not NAND dump) 
• make and restore NAND dumps 
• all without Pandora

Requirement:

Warning: Never try Hellcat's Recovery Flasher 1.60 

on PSP 2000 (TA-088V3) and PSP 3000

• PSP 1000 and 2000 non TA-088V3 with Custom Firmware enable
• Hellcat's Recovery Flasher 1.60 (Download Here)
• 550.PBP file ( Download Here)
• Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) (Download Here)

or

• Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)+550.PBP file (Download Here)

Tutorial:

Step 1

1)Extract rflash160

2) Copy RECOVERY folder and paste it right into the root of memory stick>> PSP>> GAME>> ....

If you still do not know on where to paste this folder, please refer to the Guide on how to install application provided.(Installing Guide)

Step 2

1) Extract Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)+550.PBP zip file.

2)Copy 550.PBP, PSP1000_550-GEN-D3.rfp and PSP2000_550-GEN-D3 and paste them right into root of your PSP Memory Stick.

Note: Please make sure, 5.50 eboot PBP file named with 550.PBP 

550.PBP, PSP1000_550-GEN-D3.rfp and PSP2000_550-GEN-D3 inside root of Memory Stick

Step 3

On your PSP XMB>> Games>> Memory Stick>> Hellcat's Recovery Flasher and press enter.

Click Here for Guide on how to run 

Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) on your PSP

Credits:

Hellcat

QJ.net

PSP-Hack

Read more >>

May 21, 2010 ModNation RACERS: PSP Games Free Download

ModNation RACERS Download:

Hako Version (Links are interchangeable)

Rapidshare:

Download Part 1

Download Part 2

Download Part 3

Download Part 4

Download Part 5

Download Part 6

Download Part 7

iFile:

Download Part 1

Download Part 2

Download Part 3

Download Part 4

Download Part 5

Download Part 6

Download Part 7

Password: Hako

ModNation RACERS: Video Preview

Read more >>

May 20, 2010 Easy way to make your own Pandora Battery [ PSP Tool 0.8]: PSP Homebrew Application

PSP Tool developer, raing3, delivers a update for his application… PSP Tool 0.8 is a multi-purpose application designed to help you converted a Memory Stick Pro Duo and battery into a "Magic Memory Stick" and "JigKick Battery". For your information, the Memory Stick and battery can then be used to downgrade any PSP of any version or to recover from a brick. I'm sure, this handy tool is the one of easiest ways to create Pandora Battery for your own.

Warning: Never attempt Pandora Battery on PSP 3000 or PSP with TA-088V3 motherboard model

Pandora Battery:

• Downgrade any PSP of any version
• Recover from a brick

Requirement:

• PSP with TA-085V1 motherboard model and older model. If you not sure which PSP motherboard that you used, please refer the guide provided. ( Guide on how to identify PSP motherboard)
• PSP Custom Firmware enable
• The battery must has at least 78% power.
• Official Firmware 5.00. ( Download Here)
• PSP Tool 0.8. (Download Here).
• Memory Stick ( Please backup your files inside the memory stick.)

Tutorial


Step 1.

1a) Extract psp_tool 0.8 zip file.






1c)Open 'PSP' folder.





1e) Copy PSP Tool folder and paste it right into the root of memory stick>> PSP>> GAME>> ....

If you still do not know on where to paste this folder, please refer to the Guide on how to install application provided.(Installing Guide)

Step 2.


You need to format your PSP memory stick by using PSP Tool to avoid any problems. So, please backup your files before move to the next process.

2a) On your PSP XMB>> Games>> Memory Stick>> PSP TOOL and enter.


2b) Choose 'Memory Stick Option' and enter.




2c) Next, select 'Format Memory Stick' and enter.



2d) A message will pop up and select 'Yes'. After that, your Memory Stick will in formatting mode. The process finished after PSP Tool application automatically closed/exit.



Step 3.

3a) Connect your formatted Memory Stick to a PC. You will realize that the root of Memory Stick has nothing inside.





3b) Copy PSP folder that contain inside psp_tool 0.8 folder. Please refer (1c)'s step) and paste the folder right into the root of memory stick.


3c) Copy file PBP ( FW 5.00 zip file) and paste it right into the root of memory stick.


*Attention: Downloaded OFW 5.00 may named with EBOOT . You need to rename 'EBOOT' to '500' same as shown on 3c's figure.




If you still have problem to follow the instruction on step 3c, please refer additional guide that provided
( Click Here for Additional guide).


Step 4.

Guide on how to create "Magic Memory Stick" and "JigKick Battery".

4a) On your XMB >> Game > Memory Stick > and run PSP Tool.



4b) Choose ' Memory Stick Option' and press enter.




4c) Next, select ' Create Magic Memory Stick' and press enter.



4d) After that, choose Despertar del Cementerio v8 (5.00 M33-4)' and prees enter. Take a break and wait until the process finish.

4e) A message will pop up after 4d process finished, 'Do you want to inject the Time Machine IPL now?'. Select 'Yes' and press enter.


4f) Then, you will ask to pandorize your PSP battery or skip the step. Select 'Yes' to pandorize your PSP battery.


4g) Lastly, you need to set a pandora button activation. (You need to press the button when you want to use the pandora battery on any PSP: Except for PSP 3000 and TA-088V3). To set it, you need to hold a button (any button) for several seconds. On the 4g picture, I have choose L trigger as my pandora button activation.

4h) You have finished the whole process after this message appeared..


How to test your Pandora Battery.


After finished all the step above, you need to test whether it working or not.

Requirement:

• PSP (Except for PSP 3000 and PSP TA-088v3)
• Pandora Battery

Guide

• Switch off your PSP.
• Remove the battery.
• Replug the battery.
• You will get 2 possibilities:

1.Power light will flashing automatically.
2.Nothing happen.

• If the first possibility happened, you have successfully created your own Pandora Battery.
• Instead, if nothing happened after you plug the battery, you have failed.

Additional Guide


I will explain a guide on how to activate Pandora Battery on targeted PSP.

• Insert your Magic Memory Stick into needed PSP.
• Press the selected pandora activation button. ( Shown on 4g picture) Hold the button.
• Plug in the JigKick Battery. ( Still holding pandora activation button)
• The PSP automatically reboot.
• A menu will appear.
• Select 'Install CFW 5.00 m33-4' and press enter.
• Wait untill the process finished.

Several reasons that make you failed to completed all the proccess.

• You have left some requirement.
• You have used a fake PSP battery.
• You have used a fake PSP Memory Stick.

Read more >>