May 22, 2010 Guide on how to run Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack): PSP Guides

Your Ad Here

In the previous post, I have showed you a guide on how to install Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) on your PSP. As you knew, Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) is an application that flashes a fresh M33 CFW (from 3.71 and above) to recover semi-bricks or to up-/downgrade CFW without using Pandora. Besides that it also can backup the FW flash and restore selected parts such as XMB theme, settings, PSN activation, complete firmware and much more. Now, I want to share with you a guide on how to run Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) on your PSP.


Requirement:

Warning: Never try Hellcat's Recovery Flasher 1.60 

on PSP 2000 (TA-088V3) and PSP 3000

• PSP (except PSP 2000 (TA-088V3) and PSP 3000) Custom Firmware enable
• Hellcat's Recovery Flasher 1.60 (Download Here)
• 550.PBP file ( Download Here)
• Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack) (Download Here)

or

• Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)+550.PBP file (Download Here)

...........................................

If you have any problems to install Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack), please refer the guide provided 

[Guide on how to install Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)]

................................................

Tutorial

After you have successfully installed Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)......


Step 1

On your PSP XMB>> Games>> Memory Stick>> Hellcat's Recovery Flasher and press enter.

1) Select 'I AGREE, now take me to the program' to enter the application main menu.

2) This is Hellcat's Recovery Flasher main menu. First, you need to choose which Target FW (based on PBP.file that placed in the root of PSP Memory Stick) that you want to flash on your PSP. In this situation, I want upgrade my PSP to 5.50 Gen-D3 CFW. I'm also already placed 550.PBP inside root of Memory Stick [As shown in guide on how to install Hellcat's Recovery Flasher 1.60 (5.50 GEN-D3 FW Pack)]. Select 'load from external FW pack'.

3) Next, select 'Install CFW (of version selected above)' to continue the process.

4) After that, you will see a message that ask you to choose a Firmware-Pack. You need to choose either PSP2000_550-GEN-D3.rfp or PSP1000_550-GEN-D3. If you used a slim please select PSP2000_550-GEN-D3 or for PHAT you need to select PSP1000_550-GEN-D3.

5) We almost done. You need to choose whether reset or do not reset your PSP previous settings.



Note: Reset settings is recommended



6) Finally, the application will flash your PSP. Please wait for a few minutes before the process is finished. You will ask to press any button at the final stage of the process before you need to make sure your PSP completely shutdown.

7) After successfully finishes all steps above, switch on your PSP.
...................................................................................
Additional guide:

You possibly have problem to activate your 5.50 Gen D3 vsh menu (Press [SELECT] Button). If yes, you need to follow a few instructions that I already provided.

Guide:


1)First step, you need to enter 5.50 Gen D3 recovery menu. To enter the recovery menu, please refer guide provided. ( Guide to enable plugins on recovery menu)

2) After successfully enter Recovery Menu, select Configuration and press enter.








3) Next, choose 'Use VshMenu' and press enter button to make 'currently' is labeled by VshMenu.


Finally, exit the Recovery Menu and enjoy....

....................................................................